DiP-M Alpha 4

Okay. Time for some more testing on DiP-M.

I spent some time after work in the workshop and found out some errors concerning the digipeater.

  1. The 2.5mm connector for the TH-AT25 had some issues, replaced that.
  2. Rx diode was faulty, so I wasn’t fully aware if the unit was receiving or not.
  3. I accidentally forgot ‘W’ in the BTEXT, so the position wasn’t valid.

Config for DiP-M’s Foxdigi:

cmd: disp
ECHO ON
TXDELAY 128
GPS GPRMC
MONitor ALL
DIGIpeater ON – fill-in digipeater
BEACON On EVERY 1
UNPROTO APRS-0,WIDE1-1
MYCALL TF2SUT-3
MYALIAS WIDE1-1
BTEXT !6406.97N/02153.08W#DiP-M test Kopavogur

Packets digipeated by DiP-M (Callsign TF2SUT-3)

2012-07-21 19:13:56 UTC: TF2SUT-9>V4PW8S,WIDE1-1,WIDE2-1,qAR,TF3ARI-1:`1PXl”r>/”4E}
2012-07-21 19:15:08 UTC: TF2SUT-9>APTT4,TF2SUT-3*,WIDE2-1,qAR,TF3ARI-1:>/Undanfari II Beacon
2012-07-21 19:16:12 UTC: TF2SUT-9>APTT4,TF2SUT-3*,WIDE2-1,qAR,TF3ARI-1:>/Undanfari II Beacon
2012-07-21 19:19:04 UTC: TF2SUT-9>V4PW8S,TF2SUT-3*,WIDE2-1,qAR,TF3ARI-1:`1PXl”r>/”4J}
2012-07-21 19:26:46 UTC: TF2SUT-9>APTT4,TF2SUT-3*,qAR,TF3ARI-1:>/Undanfari II Beacon
2012-07-21 19:28:24 UTC: TF2SUT-9>APTT4,TF2SUT-3*,qAR,TF3ARI-1:>/Undanfari II Beacon
2012-07-21 19:29:40 UTC: TF2SUT-9>APTT4,TF2SUT-3*,qAR,TF3ARI-1:>/Undanfari II Beacon
2012-07-21 19:30:42 UTC: TF2SUT-9>APTT4,TF3RPF*,WIDE2-1,qAR,TF3ARI-1:>/Undanfari II Beacon

Very neat, ain’t it?

This entry was posted in Electronics, Radio and tagged , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *